Siemens SINAMICS G110M - SINAMICS G110 M Converter

3.2 SINAMICS G110M converter
Overview
The SINAMICS G110M system consists of the following components:
Terminal Hous‐
ing (TH)
The TH acts as the connection between the G110M
and the motor. The TH replaces the normal motor
terminal box.
The TH contains the following components:
Communications
and Power Inter‐
face (CPI)
The CPI provides all the input
and outputs connections for
the converter. In addition it al‐
lows for the provision of an
optional external 24 V power
supply.
Control Module
(CM)
The CM interfaces with the
CPI and the converter to pro‐
vide all the command and
control functions of the con‐
verter.
Power Module
(PM)
The PM provides the power to the converter and
through the DC link provides power to the low voltage
circuits in the CM and the PM.
Three-phase
motor
The SINAMICS G110M is designed for mounting on
the SIMOGEAR geered motors. It is compatible with
motors of frame sizes 71 to 112.
The Power Modules are designed for a speci󹪝c power range and the Terminal Housings are
designed to work with speci󹪝c motors. The Terminal Housing not only allows the direct
mounting onto a motor but speci󹪝c cable glands and mains connectors are speci󹪝ed. All the
various combinations of Power Modules, Terminal Housings (including the Control Modules)
and Options are given in the tables below.
Table 3-1 PM240M Power Modules - 3AC, 400 V, Class A, IP66
Frame size Rated output power
(kW)
Rated output cur‐
rent (A)
Article number
based on High Overload (HO)
FSA 0.37 1.3 6SL3517-1BE11-3AM0
FSA 0.75 2.2 6SL3517-1BE12-3AM0
Description
3.2 SINAMICS G110M converter
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL 25