Frame size Rated output power
(kW)
Rated output cur‐
rent (A)
Article number
based on High Overload (HO)
FSA 1.1 3.1 6SL3517-1BE13-3AM0
FSA 1.5 4.1 6SL3517-1BE14-3AM0
FSB 2.2 5.6 6SL3517-1BE16-3AM0
FSB 3.0 7.3 6SL3517-1BE17-7AM0
FSB 4.0 8.8 6SL3517-1BE21-0AM0
Table 3-2 CU240M Terminal Housing (including the Control Module)
Communications Motor frame size Mains / 24 V DC con‐
nections
Article number
USS FS71 Cable glands 6SL3544-0LB02-1BA0
USS FS80/90 Cable glands 6SL3544-0MB02-1BA0
USS FS100/112 Cable glands 6SL3544-0NB02-1BA0
PROFIBUS FS71 Cable glands 6SL3544-0LB02-1PA0
PROFIBUS FS80/90 Cable glands 6SL3544-0MB02-1PA0
PROFIBUS FS100/112 Cable glands 6SL3544-0NB02-1PA0
PROFIBUS FS71 HanQ 4/2 / 7/8" 6SL3544-0TB02-1PA0
PROFIBUS FS80/90 HanQ 4/2 / 7/8" 6SL3544-0PB02-1PA0
PROFIBUS FS100/112 HanQ 4/2 / 7/8" 6SL3544-0QB02-1PA0
PROFINET FS71 Cable glands 6SL3544-0LB02-1FA0
PROFINET FS80/90 Cable glands 6SL3544-0MB02-1FA0
PROFINET FS100/112 Cable glands 6SL3544-0NB02-1FA0
PROFINET FS71 HanQ 4/2 / 7/8" 6SL3544-0TB02-1FA0
PROFINET FS80/90 HanQ 4/2 / 7/8" 6SL3544-0PB02-1FA0
PROFINET FS100/112 HanQ 4/2 / 7/8" 6SL3544-0QB02-1FA0
AS-i FS71 Cable glands 6SL3544-0LB02-1MA0
AS-i FS80/90 Cable glands 6SL3544-0MB02-1MA0
AS-i FS100/112 Cable glands 6SL3544-0NB02-1MA0
AS-i FS71 HanQ 4/2 / 7/8" 6SL3544-0TB02-1MA0
AS-i FS80/90 HanQ 4/2 / 7/8" 6SL3544-0PB02-1MA0
AS-i FS100/112 HanQ 4/2 / 7/8" 6SL3544-0QB02-1MA0
Every SINAMICS G110M is delivered with the following accessories:
All variants
• PTC connection cable - this is the extension cable used to connect the PTC wires from the
motor to the connection on the CPI board.
• EM brake cable - this the extension cable used to connect the EM brake wires from the motor
to the mains connector when the EM brake wire is too short.
• Pre-wired motor terminal cables ready for connecting to the motor terminals on the motor.
Description
3.2 SINAMICS G110M converter
Distributed converter for SIMOGEAR geared motors
26 Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL