Siemens SINAMICS G110M - Technological Unit of the Technology Controller

The parameter belongs to the unit group 7_1 and p0505 changes over the unit.
Table 8-44 Unit group (p0100)
Unit group Unit selection for p0100 =
0 1 2
7_4 Nm lbf ft Nm
14_6 kW hp kW
25_1 kg m² lbf ft² kg m²
27_1 kg lb kg
28_1 Nm/A lbf ft/A Nm/A
Table 8-45 Unit group (p0505)
Unit group Unit selection for p0505 = Reference value for %
1 2 3 4
2_1 Hz % Hz % p2000
3_1 rpm % rpm % p2000
5_1 Vrms % Vrms % P2001
5_2 V % V % p2001
5_3 V % V % p2001
6_2 Arms % Arms % p2002
6_5 A % A % p2002
7_1 Nm % lbf ft % p2003
7_2 Nm Nm lbf ft lbf ft -
14_5 kW % hp % r2004
14_10 kW kW hp hp -
21_1 ° C ° C ° F ° F -
21_2 K K ° F ° F -
39_1 1/s² % 1/s² % p2007
8.14.3 Technological unit of the technology controller
Options when selecting the technological unit
p0595 de󹪝nes in which technological unit the input and output variables of the technology
controller are calculated, e.g. [bar], [m³/min] or [kg/h].
Reference variable
p0596 de󹪝nes the reference variable of the technological unit for the technology controller.
Advanced commissioning
8.14 Selecting physical units
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL 239