Siemens SINAMICS G110M - Expanding or Freely Interconnecting Telegrams

8.6.8 Expanding or freely interconnecting telegrams
Overview
When you have selected a telegram, the converter interconnects the corresponding signals with
the 󹪝eldbus interface. Generally, these interconnections are locked so that they cannot be
changed. However, with the appropriate setting in the converter, the telegram can be extended
or even freely interconnected.
Function description
Interconnection of send data and receive data
3='VHQGZRUG
3='VHQGZRUG
3='VHQGZRUG
3='VHQGZRUG
3='VHQGZRUG
31R

31R

31R

31R

31R

31R

31R

31R

31R

31R

6HQGZRUGYDOXHGRXEOHZRUG
6HQGZRUGSDUDPHWHUQXPEHUGRXEOHZRUG
6HQGZRUGYDOXHZRUG
6HQGZRUGSDUDPHWHUQXPEHUZRUG
U>@

S>@
U>@

S>@
S>@
U>@

U>@

S>@
S>@
U>@

U>@

S>@
S>@
U>@

S>@
U>@

U>@

S>@
S>@
U>@





Figure 8-19 Interconnection of the send data
In the converter, the send data are available in the "Word" format (p2051) - and in the "Double
word" format (p2061). If you set a speci󹪝c telegram, or you change the telegram, the converter
automatically interconnects parameters p2051 and p2061 with the appropriate signals.
5HFHLYHZRUG3='
5HFHLYHZRUG3='
5HFHLYHZRUG3='
5HFHLYHZRUG3='
5HFHLYHZRUG3='
9DOXHUHFHLYHZRUG
GRXEOHZRUG
9DOXHUHFHLYHZRUG
ZRUG
9DOXHUHFHLYHZRUG
ELWE\ELW
U>@

U>@

U>@

U>@

U

U

U

U

U

U

U

U

U>@

U>@

U>@

U>@

U>@

U>@




Figure 8-20 Interconnection of the receive data
Advanced commissioning
8.6 Drive control via PROFIBUS or PROFINET
Distributed converter for SIMOGEAR geared motors
204 Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL