Complex block Limit monitor
LVM 0
LVM 1
You can only use a function block once. The converter has 3 adders for instance, ADD 0, ADD 1,
and ADD 2. If you have already congured 3 adders, then no other adders are available.
8.13.2 Further information
Application description for the free function blocks
Further information is provided on the Internet:
Function Manual (https://support.industry.siemens.com/cs/gb/en/view/
60467055/29243398027)
Advanced commissioning
8.13 Free function blocks
Distributed converter for SIMOGEAR geared motors
236 Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
To Next Page
Loading...
