Siemens SINAMICS G110M - Appendix; New and Extended Functions; Firmware Version 4.7 SP13

Appendix
A
A.1 New and extended functions
A.1.1 Firmware version 4.7 SP13
Table A-1 New functions and function changes in 󹪝rmware 4.7 SP13
Function SINAMICS
G120 G120D
*'
*0
*&
&83
&8%
&8(
&86
&8'
&8'
1 SIMOTICS 1FP1 and 1FP3 synchronous-reluctance motors have also been
approved for operation with SINAMICS G120C.
- ✓ ✓ ✓ ✓ ✓ - ✓ -
2 The extended safety functions SS1, SLS, SSM and SDI are approved when
using synchronous-reluctance motors from Siemens and third-party manu‐
facturers.
- - - - - ✓ - ✓ -
3 The converter transmits the state of the fail-safe digital input F-DI 0 via
PROFIsafe when using the basic functions.
You can 󹪝nd more information in the "Safety Integrated" Function Manual.
"Safety Integrated" function manual (https://
support.industry.siemens.com/cs/ww/en/view/109751320)
✓ ✓ ✓ - - ✓ ✓ ✓ ✓
4 Modbus RTU:
The converter supports the combination "1 stop bit" and "no parity".
- - ✓ ✓ ✓ ✓ ✓ - -
5 EtherNet/IP:
When selecting the ODVA AC/DC drive pro󹪝le, although telegram 1 is pre‐
de󹪝ned, it can be extended to include additional process data.
The EDS 󹪝le has been extended accordingly by a telegram with a length of 6
words.
More information is provided in the "Fieldbuses" Function Manual.
"Fieldbus" function manual (https://
support.industry.siemens.com/cs/ww/en/view/109751350)
EDS (https://support.industry.siemens.com/cs/ww/de/view/78026217)
✓ ✓ ✓ ✓ - ✓ ✓ ✓ ✓
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL 397