Siemens SINAMICS G110M - Firmware Upgrade and Downgrade; Upgrading Firmware

10.4 Firmware upgrade and downgrade
Overview
You can load the converter 󹪝rmware from the Internet to a memory card.
Precondition
You have the appropriate memory card.
Recommended memory cards (Page 138)
Function description
Procedure
1. Download the required 󹪝rmware to your PC from the Internet.
Download (https://support.industry.siemens.com/cs/ww/en/view/67364620)
2. Extract the 󹪝les to a directory of your choice on your PC.
3. Transfer the unzipped 󹪝les into the root directory of the memory card.
Figure 10-1 Example of memory card contents after the 󹪝le transfer
Depending on the 󹪝rmware, the 󹪝lenames and the number of 󹪝les may di󹪜er from the display
above.
The "USER" directory does not exist on unused memory cards. After the memory card is
plugged in for the 󹪝rst time, the converter creates a new "USER" directory.
You have prepared the memory card for the 󹪝rmware upgrade or downgrade.
❒
10.4.1 Upgrading 󹪝rmware
When upgrading 󹪝rmware you replace the converter's 󹪝rmware with a newer version. Only
update the 󹪝rmware to a newer version if you require the expanded range of functions of that
newer version.
Corrective maintenance
10.4 Firmware upgrade and downgrade
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL 379