Number Name
p8806[0...53] Identication and Maintenance 1 / I&M 1
p8807[0...15] Identication and Maintenance 2 / I&M 2
p8808[0...53] Identication and Maintenance 3 / I&M 3
p8809[0...53] Identication and Maintenance 4 / I&M 4
p9400 Safely remove memory card / Mem_card rem
p9484 BICO interconnections search signal source / BICO S_src srch
Note
Write protection for multimaster eldbus systems
Via multimaster eldbus systems, e.g. BACnet or Modbus RTU, in spite of write protection being
activated, parameters can still be changed. So that write protection is also active when accessing
via these eldbuses, you must additionally set p7762 to 1.
Protecting the converter settings
7.1 Write protection
Distributed converter for SIMOGEAR geared motors
146 Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
To Next Page
Loading...
