Parameter
Number Name Factory setting
p0922 PROFIdrive PZD telegram selection 1
r2050[0…11] CO: PROFIdrive PZD receive word -
p2051[0…16] CI: PROFIdrive PZD send word 0 or dependent on
the converter
r2053[0…16] PROFIdrive diagnostics send PZD word -
r2060[0…10] CO: PROFIdrive PZD receive double word -
p2061[0…15] CI: PROFIdrive PZD send double word 0
r2063[0…15] PROFIdrive diagnostics PZD send double word -
r2067 PZD maximum interconnected
[0] Receive (r2050, r2060)
[1] Send (p2051, p2061)
-
p2079 PROFIdrive PZD telegram selection extended 1
p2080[0…15] BI: Binector-connector converter, status word 1 [0] 899
[1] 899.1
[2] 899.2
[3] 2139.3
[4] 899.4
[5] 899.5
[6] 899.6
[7] 2139.7
[8] 2197.7
[9] 899.9
[10] 2199.1
[11] 1407.7
[12] 0
[13] 2135.14
[14] 2197.3
[15] 2135.15
r2090.0…15 BO: PROFIdrive receive PZD1 bit by bit -
r2091.0…15 BO: PROFIdrive PZD2 receive bit-serial -
r2092.0…15 BO: PROFIdrive PZD3 receive bit-serial -
r2093.0…15 BO: PROFIdrive PZD4 receive bit-serial -
Advanced commissioning
8.6 Drive control via PROFIBUS or PROFINET
Distributed converter for SIMOGEAR geared motors
206 Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
To Next Page
Loading...
