Parameter Description Factory setting
p0858[C] BI: Unconditionally close holding brake 0
p1226[D] Speed threshold for standstill detection 20 rpm
p1227 Standstill detection monitoring time 300 s
p1228 Pulse suppression delay time 0.01 s
p1351[D] CO: Motor holding brake start frequency 0
p1352[C] CI: Motor holding brake start frequency signal source 1351
p1475[C] CI: Speed controller torque setting value for motor holding
brake
0
Advanced commissioning
8.12 Motor holding brake
Distributed converter for SIMOGEAR geared motors
234 Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
To Next Page
Loading...
