Parameter Description Factory setting
r2132 CO: Actual alarm code -
r2134[0 … 63] Alarm value for oat values -
r2145[0 … 63] Alarm time received in days -
r2146[0 … 63] Alarm time removed in days -
Table 9-9 Extended settings for alarms
Parameter Description Factory setting
You can change up to 20 dierent alarms into a fault or suppress alarms:
p2118[0…19] Change message type, message number 0
p2119[0 … 19] Change message type, type 1
Further information is provided in the parameter list.
Alarms, faults and system messages
9.5 Alarms, alarm buer, and alarm history
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL 353
To Next Page
Loading...
