Siemens SINAMICS G110M - Page 401

Function SINAMICS
G120 G120D
6 Commissioning with prede󹪝ned motor data for SIMOTICS GP/SD synchro‐
nous-reluctance motors:
• Second generation: 1FP1 . 04 → 1FP1 . 14
• Further frame sizes:
– 1.1 kW … 3 kW, 1500 1/min, 1800 1/min, 2810 1/min
– 0.75 kW … 4 kW, 3000 1/min, 3600 1/min
• In planning:
– 37 kW … 45 kW, 1500 1/min, 1800 1/min, 2810 1/min
– 5.5 kW … 18.5 kW, 3000 1/min, 3600 1/min
– 45 kW, 3000 1/min, 3600 1/min
– The prede󹪝ned motor data is already included in the 󹪝rmware
✓ - ✓ - ✓
1)
- ✓ - -
7 Extended setting option for evaluating the STOP cam in the "basic positioner"
function
Two di󹪜erent functions to evaluate STOP cams can be set:
• Edge-triggered evaluation (factory setting)
• Level-triggered evaluation
For more information, refer to the "Basic Positioner" Function Manual or the
operating instructions for "SINAMICS G120D Converter with CU250D-2 Con‐
trol Units".
"Basic positioner" function manual (https://
support.industry.siemens.com/cs/ww/en/view/109477922)
Operating instructions SINAMICS G120D with CU250D-2 (https://
support.industry.siemens.com/cs/ww/en/view/109477365)
- - - - - ✓ - ✓ -
1)
Installation with PM240-2 or PM240P-2 Power Modules
Appendix
A.1 New and extended functions
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL 399