Manual Adjustment Procedure
1. In the [Site Setup Data] Menu, press the <Down Arrow> and scroll to the [HF] menu cell.
Press the <Right Arrow> and a pop-up [Manual] prompt will appear as shown below.
Note
Press the <Up/Down Arrow> to select [Automatic], if desired.
2. Use the numerical keys to input the desired correction value. Press <ENT> to input value.
3. The new correction value will appear next to the [HF] menu cell as shown below.
Troubleshooting
10.4 Site Setup Data
FUP1010 IP67 Portable Flowmeter
Operating Instructions, 02/2010, A5E02951522A Revision 01
131
To Next Page
Loading...
