Scale parameters and functions of the belt scale
8.22 DR 30 Process state
SIWAREX WP241
126 Manual, 04/2014, A5E33713528A
Current main totalizer (S2)
The material flow is saved in a powerfail-proof memory. It can be deleted using the "Log and
delete" command.
Refresh counter for process values
Measured values are calculated every 10 ms in the SIWAREX module. A counter is
incremented by 1 each time. Once the counter reaches the value 65536, it starts again from
zero. The counter can be used as a time stamp for data record DR 30.
To Next Page
Loading...
Need help?
General
