SIWAREX WP241
Manual, 04/2014, A5E33713528A
13
General safety instructions
Handling of the device/system by persons other than qualified personnel or ignoring the
warning instructions can result in severe injuries or damages. This means only qualified
personnel are permitted to handle this device/system.
Commissioning is absolutely prohibited until it has been ensured that the machine in which
the component described here is to be installed fulfills the regulations/specifications of
Machinery Directive 89/392/EEC.
Note
The specifications of the manual for the SIMATIC S7
-1200 system apply to configuration,
installation and commissioning in the SIMATIC environment. This chapter includes additional
information on hardware configuration, installation and preparation for operation of the
SIWAREX WP241.
The safety notes must be observed.
Note
The device was developed, manufactured, tested and documen
ted in compliance with the
relevant safety standards. The device does usually not pose any risks of material damage or
personal injury.
To Next Page
Loading...
Need help?
General
