Communication
11.1 Integration in SIMATIC S7-1200
SIWAREX WP241
160 Manual, 04/2014, A5E33713528A
Error codes of function block
Table 11- 3 Statuses/errors when working with the function block
Address module does not match the function block
Data record does not match the inserted module
Runtime error during transmission of data record
Reading of I/O data failed
SIWAREX no longer responds
Command was sent although StartUp is still TRUE
Data record version does not match the firmware
An invalid command code was sent
Synchronous data operation error has occurred
Startup synchronization of module running
Note
If execution of the function block is faulty, the variables shown do not correspond to the
actual status in the module.