Simrad GO XSE - Page 103

VelocityTrack settings
Use this dialog to set speed thresholds of targets to be colored.
The speed threshold can be defined to apply for the radar source of
the selected radar panel only, or to all radar sources connected to
the system. The setting is only applied to those radars powered and
connected at the time the setting is made. If the all radar sources
option is selected, newly connected radars will use the specified
values automatically.
VelocityTrack examples
Approaching and diverging moving targets can be indicated as
neutral (not colored) in some circumstances. The navigator should
be aware of these situations to safely use the VelocityTrack feature
as an aid for collision avoidance.
Examples of how VelocityTrack behaves in 2 navigation scenarios is
illustrated below. The illustrations show a target (A) crossing own
vessel's (B) path.
C
A
B
D
123
0°
45 1
2
3
4
5
0°
The examples show the target movement (1-5) over 5 radar scans
with the radar in relative motion mode.
Radar | GO XSE Operator Manual
103