• An AIS SART icon is located on the chart in the position received
from the AIS SART
• An alarm message is displayed
If you have enabled the siren, the alarm message is followed by an
audible alarm.
Ú
Note: The icon is green if the received AIS SART data is a test
and not an active message.
AIS SART alarm message
When data is received from an AIS SART, an alarm message is
displayed. This message includes the AIS SART’s unique MMSI
number, and its position, distance, and bearing from your vessel.
You have the following options:
• Ignore the alarm
-
The alarm is muted and the message closed. The alarm does
not reappear
Ú
Note: If you ignore the alarm, the AIS SART icon remains visible
on your chart, and the AIS SART remains in the Vessels list.
• Save the waypoint
-
The waypoint is saved to your waypoint list. This waypoint
name is prefixed with MOB AIS SART - followed by the unique
MMSI number of the SART. For example, MOB AIS SART -
12345678.
• Activate the MOB function
- The display switches to a zoomed chart panel, centered on the
AIS SART position
- The system creates an active route to the AIS SART position
152
AIS | GO XSE Operator Manual
To Next Page
Loading...
Need help?
General
