Sindoh C300 - Page 103

10-33
Use printer menus
10
Menu Item Description
Sides
Off*
Long Edge
Short Edge
Specify the orientation of the original document when scanning on both
sides of the document.
Note
‑ This menu item appears only in some printer models.
File Name Specify the file name of the scanned image.
Note: An asterisk (*) next to a value indicates the factory default setting.
Advanced Imaging
Menu Item Description
Color Balance
Cyan ‑ Red
‑4 to 4 (0*)
Magenta ‑ Green
‑4 to 4 (0*)
Yellow ‑ Blue
‑4 to 4 (0*)
Adjust the color intensity during scanning.
Auto Color Detect
Color Sensitivity
1‑9 (5*)
Area Sensitivity
1‑9 (5*)
FTP Bit Depth
1 bit*
8 bit
Set the amount of color that the printer detects from the original
document.
Contrast
Best for content*
0
1
2
3
4
5
Specify the contrast of the output.
Background Removal
Level
‑4 to 4 (0*)
Adjust the amount of background visible on a scanned image.
Scan Edge to Edge
On
Off*
Allow edge‑to‑edge scanning of the original document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu Item Description
Text Default
5‑95 (75*)
Set the quality of text on a scanned image.
Text/Photo Default
5‑95 (75*)
Set the quality of text or photo image on a scanned image.
Note: An asterisk (*) next to a value indicates the factory default setting.