Sindoh C300 - 10.10 USB; 10.11 Restrict external network access

Use printer menus
10-48
10
Menu Item Description
Retries for HTTP/FTP Requests
1–299 (3*)
Set the number of retries to connect to the HTTP/FTP server.
Note: An asterisk (*) next to a value indicates the factory default setting.
10.10 USB
Menu Item Description
PCL SmartSwitch
Off
On*
Set the printer to switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language.
Note
‑ If PCL SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup
menu.
PS SmartSwitch
Off
On*
Set the printer to switch to PS emulation when a print job received
through a USB port requires it, regardless of the default printer language.
Note
‑ If PCL SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup
menu.
Mac Binary PS
On
Auto*
Off
Set the printer to process Macintosh binary PostScript print jobs.
Note
‑ When set to On, the printer processes raw binary PostScript print
jobs from computers using the Macintosh operating system.
‑ When set to Auto, the printer processes print jobs from computers
using either Windows or Macintosh operating systems
‑ When set to Off, the printer filters PostScript print jobs using the
standard protocol.
Enable USB Port
Disable
Enable*
Enable the standard USB port.
Note: An asterisk (*) next to a value indicates the factory default setting.
10.11 Restrict external network access
Menu Item Description
Restrict external network access
Off*
On
Restrict access to network sites.
External network address Specify the network addresses with restricted access.
E‑mail address for notification Specify an e‑mail address to send a notification of logged events.
Ping frequency
1–300 (10*)
Specify the network query interval in seconds.
Note: An asterisk (*) next to a value indicates the factory default setting.