Use printer menus
10-40
10
10.2 Wireless
Menu Item Description
Setup Using Mobile Appz Configure the wireless connection using the Sindoh Mobile Assistant app.
Setup On Printer Panel
Choose Network
Add Wi‑Fi Network
• Network Name
• Network Mode
Infrastructure
• W i r e l e s s S e c u r i t y M o d e
Disabled*
WEP
WPA2/WPA ‑ Personal
WPA2 ‑ Personal
Determine the wireless network that the printer connects to.
Note
‑
This menu item appears as Wireless Connection Setup in the
Embedded Web Server.
Wi‑Fi Protected Setup
Start Push Button Method
Start PIN Method
Establish a wireless network and enable network security.
Note
‑
Start Push Button Method connects the printer to a wireless network
when buttons on both the printer and the access point (wireless
router) are pressed within a given time.
‑
Start PIN Method connects the printer to a wireless network when
a PIN on the printer is entered into the wireless settings of the access
point.
Enable Wi‑Fi Direct
On
Off*
Set the printer to connect directly to Wi‑Fi devices.
Compatibility
802.11b/g/n (2.4GHz)
802.11a/b/g/n/ac (2.4GHz/5GHz)*
802.11a/n/ac (5GHz)
Specify the wireless standard for the wireless network.
Wireless Security Mode
Disabled*
WEP
WPA2/WPA ‑ Personal
WPA2 ‑ Personal
802.1x ‑ RADIUS
Set the type of security for connecting the printer to wireless devices.
WEP Authentication Mode
Auto*
Open
Shared
Set the type of Wireless Encryption Protocol (WEP) used by the printer.
Note
‑
This menu item appears only if Wireless Security Mode is set to WEP.
Set WEP Key Specify a WEP password for secure wireless connection.
Note
‑
This menu item appears only if Wireless Security Mode is set to WEP.
WPA2‑Personal
AES*
Enable wireless security through WPA2.
Note
‑
This menu item appears only if Wireless Security Mode is set to
WPA2‑Personal.
Note: An asterisk (*) next to a value indicates the factory default setting.
To Next Page
Loading...
