10-3
Use printer menus
10
2. Device
2.1 Preferences
Menu item Description
Display Language
[List of languages]
Set the language of the text that appears on the display.
Country/Region
[List of countries or regions]
Identify the country or region where the printer is configured to
operate.
Run initial setup
No*
Yes
Run the setup wizard.
Keyboard
Keyboard Type
[List of languages]
Select a language as a keyboard type.
Note
‑
All the Keyboard Type values may not appear or may require
special hardware to appear.
Displayed information
Display Text 1 (IP Address*)
Display Text 2 (Date/Time*)
Custom Text 1
Custom Text 2
Specify the information to appear on the home screen.
Date and Time
Configure
Current Date and Time
Manually Set Date and Time
Date Format (MM‑DD‑YYYY*)
Time Format (12 hour A.M./P.M.*)
Time Zone (GMT*)
Configure the printer date and time.
Date and Time
Network Time Protocol
Enable NTP (On*)
NTP Server
Enable Authentication (None*)
Configure the settings for Network Time Protocol (NTP).
Note
‑
When Enable Authentication is set to MD5 key, Key ID and
Password appear.
Paper Sizes
U.S.*
Metric
Specify the unit of measurement for paper sizes.
Note
‑
The country or region selected in the initial setup wizard
determines the initial paper size setting.
Screen Brightness
20–100% (100*)
Adjust the brightness of the display.
Flash Drive Access
Disabled
Enabled*
Enable access to the flash drive.
One Page Flatbed Scanning
On
Off*
Set copies from the scanner glass to only one page at a time.
Screen Timeout
5–300 (60*)
Set the idle time in seconds before the display shows the home
screen, or before the printer logs out a user account automatically.
Note : An asterisk (*) next to a value indicates the factory default setting.
To Next Page
Loading...
