Sindoh C300 - Printing the Menu Settings Page

3-19
Set up, install, and configure
3
Note
-  YoucanchangetheSSIDonthecontrolpanel.Navigateto:Settings→Network/Ports→Wi-FiDirect→
   SSID.
- YoucanalsochangethePSKonthecontrolpanel.Navigateto:Settings→Network/Ports→Wi-FiDirect→
Set PSK.
Deactivating the Wi‑Fi network
1  Fromthehomescreen,touchSettings→Network/Ports→NetworkOverview→ActiveAdapter→
Standard Network.
2  Followtheinstructionsonthedisplay.
Checking the printer connectivity
1  Fromthehomescreen,touchSettings→Reports→Network→NetworkSetupPage.
2 Check the first section of the page and confirm that the status is connected.
If the status is not connected, then the LAN drop may be inactive or the network cable may be unplugged or
malfunctioning. Contact your administrator for assistance.
Printing the Menu Settings Page
 Fromthehomescreen,touchSettings→Reports→MenuSettingsPage.