Sindoh C300 - Page 42

Set up, install, and configure
3-18
3
❖
Using the personal identification number (PIN) method
1  Fromthehomescreen,touchSettings→Network/Ports→Wireless→Wi-FiProtectedSetup→
Start PIN Method.
2 Copy the eight-digit WPS PIN.
3 Open a web browser, and then type the IP address of your access point in the address field.
Note
- To know the IP address, see the documentation that came with your access point.
-  Ifyouareusingaproxyserver,thentemporarilydisableittoloadthewebpagecorrectly.
4  AccesstheWPSsettings.Formoreinformation,seethedocumentationthatcamewithyouraccesspoint.
5 Enter the eight-digit PIN, and then save the changes.
Connecting a mobile device to the printer
Before connecting your mobile device, make sure to do the following:
-  EnableWi-FiDirect®intheprinter.Fromthecontrolpanel,navigateto:Settings→Network/Ports→
   Wireless→EnableWi-FiDirect.
-  Showthepresharedkey(PSK)ontheNetworkSetupPage.Fromthecontrolpanel,navigateto:Settings→
   Network/Ports→Wi-FiDirect→ShowPSKonSetupPage.
-  PrinttheNetworkSetupPage.Fromthecontrolpanel,navigateto:Settings→Reports→Network→
Network Setup Page.
❖
Connecting using Wi‑Fi Direct
1  Fromthemobiledevice,gotothesettingsmenu.
2  EnableWi-Fi,andthentapWi-FiDirect.
3  SelecttheprinterSSID.
4 Confirm the connection on the printer control panel.
❖
Connecting using Wi‑Fi
1  Fromthemobiledevice,gotothesettingsmenu.
2  TapWi-Fi,andthenselecttheprinterSSID.
Note
-  ThestringDIRECT-xy(wherexandyaretworandomcharacters)isaddedbeforetheSSID.
3 Enter the PSK.
Note
- The PSK is the password.