Use printer menus
10-20
10
5. Copy
Copy Defaults
Menu Item Description
Content Type
Text
Text / Photo*
Photo
Graphics
Improve the output result based on the content of the original document.
Sides
1 sided to 1 sided*
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Specify the scanning behavior based on the original document.
Note
‑
2 sided to 1 sided and 2 sided to 2 sided appears only in some printer
modeis.
Color
Off
On*
Auto
Specify whether to print copies in color.
Pages per Side
Off*
2 Portrait pages
4 Portrait pages
2 Landscape pages
4 Landscape pages
Specify the number of page images to print on one side of a sheet of
paper.
Print Page Borders
On
Off*
Place a border around each image when printing multiple pages on a
single page.
Collate
Off [1,1,1,2,2,2]
On [1,2,1,2,1,2]*
Print multiple copies in sequence.
“Copy from” Size
[List of paper sizes]
Set the paper size of the original document.
Note
‑
Letter is the U.S. factory default setting. A4 is the international factory
default setting.
“Copy to” Source
Tray [x] (1*)
Multipurpose Feeder
Auto Size Match
Specify the paper source for the copy job.
Darkness
1 to 9 (5*)
Adjust the darkness of the scanned image.
Number of Copies
1‑9999(1*)
Specify the number of copies.
Note: An asterisk (*) next to a value indicates the factory default setting.
To Next Page
Loading...
