Sindoh C300 - Scan Operations; Scanning to an FTP Server

Scan
9-2
9
Using the automatic document feeder and scanner glass
Correct loading of paper Incorrect loading of paper
- Use the ADF for multiple-page or two-sided
documents.
- Load an original document faceup. For multiple-page
documents, make sure to align the leading edge
before loading.
- Make sure to adjust the ADF guides to match the
width of the paper that you are loading.
- Use the scanner glass for single-page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
- Place the document facedown in the corner with the
arrow.
Scanning to an FTP server
Note
- You may need administrative rights to create a shortcut.
1 Open a web browser, and then type the printer IP address in the address field.
Note
- View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the web page correctly.
2  ClickShortcuts→AddShortcut.
3 From the Shortcut Type menu, select FTP, and then configure the settings.
4 Apply the changes.
Scanning to an FTP server using a shortcut
1 Load an original document into the ADF tray or on the scanner glass.
2  Fromthehomescreen,touchShortcuts→FTP
3 Select the shortcut.