Safety information
1-2
1
Conventions
Note
-
A note identifies information that could help you.
Warning
-
A warning identifies something that could damage the product hardware or software.
Caution
-
A caution indicates a potentially hazardous situation that could injure you.
Different types of caution statements include:
CAUTION :
POTENTIAL INJURY
Indicates a risk of injury.
CAUTION :
SHOCK HAZARD
Indicates a risk of electrical shock.
CAUTION :
HOT SURFACE
Indicates a risk of burn if touched.
CAUTION :
TIPPING HAZARD
Indicates a crush hazard.
CAUTION :
PINCH HAZARD
Indicates a risk of being caught between moving parts.
Product statements
CAUTION : POTENTIAL INJURY
To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and
properly grounded electrical outlet that is near the product and easily accessible.
CAUTION : POTENTIAL INJURY
To avoid the risk of fire or electrical shock, use only the power cord provided
with this product or the manufacturer’s authorized replacement.
CAUTION : POTENTIAL INJURY
Do not use this product with extension cords, multioutlet power strips,
multioutlet extenders, or UPS devices. The power capacity of these types of accessories can be
easily overloaded by a laser printer and may result in a risk of fire, property damage, or poor prin
ter performance.
CAUTION : POTENTIAL INJURY
Only a Inline Surge Protector that is properly connected between the printer and the
power cord provided with the printer may be used with this product. The use of non-protection
devices surge protection devices may result in a risk of fire, property damage, or poor printer
performance.
CAUTION : SHOCK HAZARD
To avoid the risk of electrical shock, do not place or use this product near water or wet locations.
CAUTION : SHOCK HAZARD
To avoid the risk of electrical shock, do not set up this product or make any electrical or cabling
connections, such as the power cord, fax feature, or telephone, during a lightning storm.
To Next Page
Loading...
