Sindoh C300 - Scanning to a Cloud Connector Profile

Scan
9-4
9
Scanning to a Cloud Connector profile
1 Load an original document into the ADF tray or on the scanner glass.
2  ClickShortcuts→AddShortcut.
3 From the Shortcut Type menu, select Network Folder, and then configure the settings.
Note
- For more information on creating a Cloud Connector profile, see “Creating a Cloud Connector profile” on
P. 3-4.
4 Touch Scan, and then assign a filename and destination folder.
5 Touch Scan Here.
If necessary, change the scan settings.
6 Scan the document.