Sindoh C300 - Printing from a Cloud Connector profile; Printing a font sample list; Placing separator sheets between copies

Print
5-6
5
For Macintosh users
1 With a document open, choose File > Print.
If necessary, click the disclosure triangle to see more options.
2 From the print options or Copies & Pages menu, choose Job Routing.
3 Select the print job type (Confidential, Repeat, Reserve, or Verify).
If the print job is confidential, then assign a user name and a four-digit PIN.
4 Click OK or Print.
5 From the printer home screen, release the print job.
- For confidential print jobs, navigate to:
Held jobs → select your user name → Confidential → enter the PIN → select the print job → configure the
settings → Print
- For other print jobs, navigate to:
Held jobs → select your user name → select the print job → configure the settings → Print
Printing from a Cloud Connector profile
1 From the home screen, touch Cloud Connector.
2 Select a cloud service provider, and then select a profile.
Note
- For more information on creating a Cloud Connector profile, see “Creating a Cloud Connector profile” on
P. 3-4.
3 Touch Print, and then select a file.
If necessary, change the settings.
Note
- Make sure to select a supported file.
4 Print the document.
Printing a font sample list
1 From the home screen, touch Settings → Reports → Print → Print Fonts.
2 Select a font sample.
Placing separator sheets between copies
1 From the home screen, touch Settings → Print → Layout → Separator Sheets → Between Copies.
2 Print the document.