Sindoh C300 - Network Access Control and Web Services

10-47
Use printer menus
10
10.8 LPDConguration
Note
‑ This menu appears only in network printers or printers that are attached to print servers.
Menu Item Description
LPD Timeout
0–65535 seconds (90*)
Set the time‑out value to stop the Line Printer Daemon (LPD) server
from waiting indefinitely for hung or invalid print jobs.
LPD Banner Page
Off*
On
Print a banner page for all LPD print jobs.
Note
‑ A banner page is the first page of a print job used as a separator
of print jobs and to identify the originator of the print job request.
LPD Trailer Page
Off*
On
Print a trailer page for all LPD print jobs.
Note
‑ A trailer page is the last page of a print job.
LPD Carriage Return Conversion
Off*
On
Enable carriage return conversion.
Note
‑ Carriage return is a mechanism that commands the printer to move
the position of the cursor to the first position on the same line.
Note: An asterisk (*) next to a value indicates the factory default setting.
10.9 HTTP/FTP Settings
Menu Item Description
Enable HTTP Server
Off
On*
Access the Embedded Web Server to monitor and manage the printer.
HEnable HTTPS
Off
On*
Configure the Hypertext Transfer Protocol Secure (HTTPS) settings.
Force HTTPS Connections
On
Off*
Force the printer to use the HTTPS connections.
Enable FTP/TFTP
Off
On*
Send files using FTP.
Local Domains Specify domain names for HTTP and FTP servers.
Note
‑ This menu item appears only in the Embedded Web Server.
HTTP Proxy IP Address Configure the HTTP and FTP server settings.
FTP Proxy IP Address
HTTP Default IP Port
1–65535 (80*)
HTTPS Device Certificate
FTP Default IP Port
1–65535 (21*)
Timeout for HTTP/FTP Requests
1–299 (30*)
Specify the amount of time before the server connection stops.
Note: An asterisk (*) next to a value indicates the factory default setting.