Sindoh C300 - Moving the Printer Safely

11-19
Maintain the printer
11
Adjusting the brightness of the printer display
1  Fromthehomescreen,touchSettings→Device→Preferences→ScreenBrightness.
2 Adjust the setting.
Conserving supplies
- Print on both sides of the paper.
Note
- Two-sided printing is the default setting in the print driver.
- Print multiple pages on a single sheet of paper.
- Use the preview feature to see how the document looks like before printing it.
- Print one copy of the document to check its content and format for accuracy.
Moving the printer to another location
CAUTION :
POTENTIAL INJURY
If the printer weight is greater than 20 kg (44 lb), then it may require two or more people to
lift it safely.
CAUTION :
POTENTIAL INJURY
To avoid the risk of fire or electrical shock, use only the power cord provided with this product or
the manufacturer’s authorized replacement.
CAUTION :
POTENTIAL INJURY
When moving the printer, follow these guidelines to avoid personal injury or printer damage:
- Makesurethatalldoorsandtraysareclosed.
- Turn off the printer, and then unplug the power cord from the electrical outlet.
- Disconnectallcordsandcablesfromtheprinter.
- If the printer has separate floor-standing optional trays or output options attached to it, then disconnect them
before moving the printer.
- If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over
thresholds and breaks in flooring.
- If the printer does not have a caster base but is configured with optional trays or output options, then remove the
   outputoptionsandlifttheprinteroffthetrays.Donottrytolifttheprinterandanyoptionsatthesametime.
- Always use the handholds on the printer to lift it.
- Any cart used to move the printer must have a surface able to support the full footprint of the printer.
- Any cart used to move the hardware options must have a surface able to support the dimensions of the options.
- Keep the printer in an upright position.
- Avoid severe jarring movements.
- Makesurethatyourfingersarenotundertheprinterwhenyousetitdown.
- Makesurethatthereisadequateclearancearoundtheprinter.
Note
- Damagetotheprintercausedbyimpropermovingisnotcoveredbytheprinterwarranty.