10-17
Use printer menus
10
Menu Item Description
A4 Width
198 mm*
203 mm
Set the width of the logical page on A4‑size paper.
Note
‑
Logical page is the space on the physical page where data is printed.
Auto CR after LF
On
Off*
Set the printer to perform a carriage return after a line feed control
command.
Note
‑
Carriage return is a mechanism that commands the printer to move the
position of the cursor to the first position on the same line.
Auto LF after CR
On
Off*
Set the printer to perform a line feed after a carriage return control
command.
Tray Renumber
Assign Tray [x]
Assign Manual Paper
Assign Manual Envelope
Configure the printer to work with a different print driver or custom
application that uses a different set of source assignments to request a
given paper source.
Tray Renumber
View Factory Defaults
Show the factory default setting assigned for each paper source.
Tray Renumber
Restore Defaults
Restore the tray renumber values to their factory defaults.
Print Timeout
Disabled
Enabled*
Set the printer to end a print job after it has been idle for the specified
amount of time in seconds.
Note
‑
Print Timeout Time appears only when Print Timeout is enabled.
Print Timeout Time
1–255 (90*)
Note: An asterisk (*) next to a value indicates the factory default setting.
3.6 Image
Menu Item Description
Auto Fit
On
Off*
Select the best available paper size and orientation setting for an image.
Note
‑
When set to On, this menu item overrides the scaling and orientation
settings for the image.
Invert
Off*
On
Invert bitonal monochrome images.
Note
‑
This menu item does not apply to GIF or JPEG image formats.
Scaling
Anchor Top Left
Best Fit*
Anchor Center
Fit Height / Width
Fit Height
Fit Width
Adjust the image to fit the printable area.
Note
‑
When Auto Fit is set to On, Scaling is automatically set to Best Fit.
Orientation
Portrait*
Landscape
Reverse Portrait
Reverse Landscape
Specify the orientation of text and graphics on the page.
Note: An asterisk (*) next to a value indicates the factory default setting.
To Next Page
Loading...
