Sindoh C300 - 6.4 Paper jam in the standard tray

12-11
Troubleshoot a problem
12
5 Remove the jammed paper.
Note
- Make sure that all paper fragments are removed.
6 Insert the manual feeder and the tray.
6.4 Paper jam in the standard tray
1  OpendoorB.
CAUTION :
HOT SURFACE
The inside of the printer might be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
2 Remove the jammed paper.
Note
- Make sure that all paper fragments are removed.
3 Close the door.