Use printer menus
10-16
10
Menu Item Description
Lock PS Startup Mode
On*
Off
Disable the SysStart file.
Note
‑
The default setting varies depending on the printer model.
Image Smoothing
On
Off*
Enhance the contrast and sharpness of low‑resolution images.
Note
‑
This setting has no effect on images with a resolution of 300 dpi or
higher.
Wait Timeout
Disabled
Enabled*
Enable the printer to wait for more data before canceling a print job.
Wait Timeout Time
15–65535 (40*)
Set the time in seconds for the printer to wait for more data before
canceling a print job.
Note
‑
This menu item appears only when Wait Timeout is enabled.
Note: An asterisk (*) next to a value indicates the factory default setting.
3.5 PCL
Menu Item Description
Font Name
[List of available fonts] (Courier*)
Select a font from the specified font source.
Symbol Set
[List of available symbol set]
(10U PC‑8*)
Specify the symbol set for each font name.
Note
‑
A symbol set is a set of alphabetic and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs such as math symbols for scientific text.
Pitch
0.08–100.00 (10.00*)
Specify the pitch for fixed or monospaced fonts.
Note
‑
Pitch refers to the number of fixed‑space characters in a horizontal inch
of type.
Orientation
Portrait*
Landscape
Reverse Portrait
Reverse Landscape
Specify the orientation of text and graphics on the page.
Lines per Page
1~255
Specify the number of lines of text for each page printed through the
PCL
®
datastream.
Note
‑
This menu item activates vertical escapement that causes the
selected number of requested lines to print between the default margins
of the page.
‑
60 is the U.S. factory default setting. 64 is the international factory
default setting.
PCL5 Minimum Line Width
1‑30 (2*)
Set the initial minimum stroke width.
PCLXL Minimum Line Width
1‑30 (2*)
Note: An asterisk (*) next to a value indicates the factory default setting.
To Next Page
Loading...
