13-3
Notices
13
Temperature information
Ambient operating temperature 10 to 32.2°C (50 to 90°F)
Shipping temperature -40 to 43.3°C (-40 to 110°F)
Storage temperature and relative humidity
1.1 to 32.2°C (34 to 90°F)
8 to 80% RH
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for
Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of
IEC 60825-1: 2014.
Class I laser products are not considered to be hazardous. The laser system and printer are designed so there
is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or
prescribed service conditions. The printer has a non-serviceable printhead assembly that contains a laser with the
following specifications:
Class: IIIb (3b) AlGaAs
Nominal output power (milliwatts): 8
Wavelength (nanometers): 770–800
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note
-
Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from electronic
inputs.
One-sided: 400 (C300)
Two-sided: 275 (C300)
Copy The product is generating hard-copy output from hard-copy
original documents.
395 (C300)
Scan The product is scanning hard-copy documents. 21 (C300)
Ready The product is waiting for a print job. 17.5 (C300)
Sleep Mode The product is in a high-level energy-saving mode. 1.3 (C300)
Hibernate The product is in a low-level energy-saving mode. N/A
Off The product is plugged into an electrical outlet, but the power
switch is turned off.
0.1
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change.
To Next Page
Loading...
