10-15
Use printer menus
10
Menu Item Description
Halftone
Normal*
Detail
Enhance the printed output to have smoother lines with sharper edges.
RGB Brightness
‑6 to 6 (0*)
Adjust the brightness, contrast, and saturation for color output.
Note
‑
This setting does not affect files where CMYK color specifications are used.
RGB Contrast
0 to 5 (0*)
RGB Saturation
0 to 5 (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Advanced Imaging
Menu Item Description
Color Balance
Cyan
‑5 to 5 (0*)
Magenta
‑5 to 5 (0*)
Yellow
‑5 to 5 (0*)
Black
‑5 to 5 (0*)
Reset Defaults
Adjust the amount of toner that is used for each color.
Color Correction
Color Correction
Auto*
Off
Manual
Color Correction Content
Modify the color settings used to print documents.
Note
‑
Off sets the printer to receive the color correction from the software.
‑
Auto sets the printer to apply different color profiles to each object on
the printed page.
‑
Manual allows the customization of the RGB or CMYK color
conversions applied to each object on the printed page.
‑
Color Correction Content is available only when Color Correction is
set to Manual.
Color Adjust Calibrate the printer to adjust color variations in the printed output.
Note: An asterisk (*) next to a value indicates the factory default setting.
3.4 PostScript
Menu Item Description
Print PS Error
On
Off*
Print a page that describes the PostScript
®
error.
Note
‑
When an error occurs, processing of the job stops, the printer prints
an error message, and the rest of the print job is flushed.
Minimum Line Width
1–30 (2*)
Set the minimum stroke width.
Note
‑
Jobs printed in 4800 CQ use half the value.
Note: An asterisk (*) next to a value indicates the factory default setting.
To Next Page
Loading...
