Sindoh C300 - Page 91

10-21
Use printer menus
10
Advanced Imaging
Menu Item Description
Color Balance
Cyan to Red
‑4 to 4 (0*)
Magenta to Green
‑4 to 4 (0*)
Yellow to Blue
‑4 to 4 (0*)
Adjust the color intensity during scanning.
Auto Color Detect
Color Sensitivity
1‑9 (5*)
Area Sensitivity
1‑9 (5*)
Set the amount of color that the printer detects from the original
document.
Contrast
Best for Content*
0
1
2
3
4
5
Specify the contrast of the output.
Background Removal
Level
‑4 to 4 (0*)
Adjust the amount of background visible on a scanned image.
Scan Edge to Edge
On
Off*
Allow edge‑to‑edge scanning of the original document.
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu Item Description
Allow Color Copies
On*
Off
Print copies in color.
Allow Save as Shortcut
On*
Off
Save custom copy settings as shortcuts.
Note: An asterisk (*) next to a value indicates the factory default setting.