Sindoh C300 - Page 41

3-17
Set up, install, and configure
3
Connecting the printer to a Wi‑Fi network
 MakesurethatActiveAdapterissettoAuto.Fromthehomescreen,touchSettings→Network/Ports→
 NetworkOverview→ActiveAdapter.
❖
Using the control panel
1  Fromthehomescreen,touchSettings→Network/Ports→Wireless→SetupOnPrinterPanel→
Choose Network.
2  SelectaWi-Finetwork,andthentypethenetworkpassword.
Note
-  ForWi-Fi-network-readyprintermodels,aprompttosetuptheWi-Finetworkappearsduringinitialsetup.
❖
Using Sindoh Mobile Assistant
1  Dependingonyourmobiledevice,downloadtheMobileAssistantapplicationfromeithertheGoogle 
Play
TM
store or App Store online store.
2  Fromtheprinterhomescreen,touchSettings→Network/Ports→Wireless→SetupUsingMobileApp→
   PrinterID.
3  Fromyourmobiledevice,launchtheapplication,andthenaccepttheTermsofUse.
Note
- If necessary, grant permissions.
4  TapConnecttoPrinter→GotoWi-FiSettings.
5 Connect your mobile device to the printer wireless network.
6  Returntotheapplication,andthentapSetupWi-FiConnection
7  SelectaWi-Finetwork,andthentypethenetworkpassword.
8  TapDone.
❖
Connecting the printer to a wireless network using Wi‑Fi Protected Setup (WPS)
Before you begin, make sure that:
-  Theaccesspoint(wirelessrouter)isWPS-certifiedorWPS-compatible.Formoreinformation,seethe
documentation that came with your access point.
-  Awirelessnetworkadapterisinstalledinyourprinter.Formoreinformation,seetheinstructionsthatcame
with the adapter.
- ActiveAdapterissettoAuto.Fromthehomescreen,touchSettings→Network/Ports→NetworkOverview
    →ActiveAdapter.
❖
Using the Push Button method
1  Fromthehomescreen,touchSettings→Network/Ports→Wireless→Wi-FiProtectedSetup→StartPush
Button Method.
2  Followtheinstructionsonthedisplay.