Sindoh C300 - Page 114

Use printer menus
10-44
10
Menu Item Description
DNS Address Specify the current Domain Name System (DNS) server address.
Backup DNS Specify the backup DNS server addresses.
Backup DNS 2
Backup DNS 3
Domain Search Order Specify a list of domain names to locate the printer and its resources
that reside in different domains on the network.
Enable DDNS
Off*
On
Update the Dynamic DNS settings.
DDNS TTL Specify the current DDNS settings.
Default TTL
DDNS Refresh Time
Enable mDNS
On*
Off
Update multicast DNS settings.
WINS Address Specify a server address for Windows Internet Name Service (WINS).
Enable BOOTP
Off*
On
Allow the BOOTP to assign a printer IP address.
Restricted Server List Specify an IP address for the TCP connections.
Note
‑ This menu item appears only in the Embedded Web Server.
‑ Use a comma to separate each IP address.
‑ You can add up to 50 IP addresses.
Restricted Server List Options
Block All Ports*
Block Printing Only
Block Printing and HTTP Only
Specify how the IP addresses in the list can access the printer
functionality.
Note
‑ This menu item appears only in the Embedded Web Server.
MTU Specify a maximum transmission unit (MTU) parameter for the TCP
connections.
Raw Print Port
1‑65535 (9100*)
Specify a raw port number for printers connected on a network.
Outbound Traffic Maximum Speed
Disabled*
Enabled
Enable the printer maximum transfer rate.
Enable TLSv1.0
On*
Off
Enable the TLSv1.0 protocol.
Enable TLSv1.1
On*
Off
Enable the TLSv1.1 protocol.
SSL Cipher List Specify the cipher algorithms to use for the SSL or the TLS
connections.
Note: An asterisk (*) next to a value indicates the factory default setting.