10-9
Use printer menus
10
Menu item Description
Printer Emulations
Emulator Security
Disable Printer Message Access
On*
Off
Disable access to printer message during emulation.
Fax Configuration
Fax Low Power Support
Disable Sleep
Permit Sleep
Auto*
Set fax to enter Sleep mode whenever the printer determines
that it should.
Print Configuration
Black Only Mode
Off*
On
Print color content in grayscale.
Print Configuration
Color Trapping
Off
1
2*
3
4
5
Enhance the printed output to compensate for misregistration in the
printer.
Print Configuration
Font Sharpening
0–150 (24*)
Set a text point‑size value below which the high‑frequency screens
are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or less
use the high‑frequency screens.
Device Operations
Quiet Mode
On
Off*
Set the printer to operate in Quiet Mode.
Note
‑
Enabling this setting slows down the printer performance.
Device Operations
Safe Mode
Off*
On
Set the printer to operate in a special mode, in which it attempts
to continue offering as much functionality as possible, despite
known issues.
For example, when set to On, and the duplex motor is
nonfunctional, the printer performs one‑sided printing of the
documents even if the job is two‑sided printing.
Device Operations
Clear Custom Status
Erase user‑defined strings for the Default or Alternate custom
messages.
Device Operations
Clear all remotely‑installed messages
Erase messages that were remotely installed.
Note
‑
This menu item is available only in some printer models.
Device Operations
Automatically Display Error Screens
On*
Off
Show existing error messages on the display after the printer remains
inactive on the home screen for a length of time equal to the Screen
Timeout setting.
Note: An asterisk (*) next to a value indicates the factory default setting.
To Next Page
Loading...
