10.1.2 On the control box
1 Hold the top end of the LCD handset
briefly (approx. ½ second) over the
magnetic unlocking key at the foot end
of the bed to gain access to the staff
control level on the LCD handset.
2 Next, select the shock position adjust-
ment function using the toggle switch.
The quickest way to access this func-
tion is to press 1x left when the "CPR"
function is displayed on the toggle
switch.
3 Press the UP button until the bed is
set to the shock position (Trendelen-
burg position).
4 To revert the bed to a horizontal posi-
tion, press the DOWN button until the
bed has reached the horizontal posi-
tion.
1 Press the unlock button and the shock position button at the
same time.
Special functions
Instruction Manual 94
To Next Page
Loading...
