6.4 Side effects
6.5 Components of the bed
6.5.1 Headboard and footboard
6.5.2 Mattress base
6.5.3 Chassis
• This bed is suitable for repeated use.
•
This bed must not be used in explosive environments caused, for example, by cleaning
agents or anaesthetics.
•
This bed must not be used in combination with high frequency surgical equipment.
•
Before using the safety sides, assess and take into consideration the clinical condition
and particular physical build of the patient. Please also refer to the special safety infor-
mation in chapter Using safety sides » 86.
This bed may only be used under the operating conditions described in this instruction man-
ual. Its use for any other type of application is deemed to be contrary to the intended pur-
pose.
Unless suitable measures are taken, long-stay patients may develop decubitus.
The standard version of the bed comes with a removable head and footboard to provide bet-
ter access to the patient in certain cases (such as when taking X-rays).
The mattress base is divided into a backrest, a seat section, a thigh rest and a lower leg rest.
The mattress base height can be adjusted when the mattress base is horizontal, and can be
tilted into a Trendelenburg or reverse-Trendelenburg position. The backrest and thigh rest
can be adjusted separately. The components for the electric drive system are accommodated
under the mattress base.
The chassis is located underneath the mattress base. The bed has four castors that can be
centrally locked with a brake pedal. One of the castors is equipped with a steering lock which
enables the bed to be moved in a straight line.
Product description
Instruction Manual 20
To Next Page
Loading...
