Stiegelmeyer Seta pro - Special Hazards; Risk of Fire

ATTENTION
5.2 Special hazards
5.2.1 Risk of fire
WARNING
If the load is too high, an electronic overload switch is activated and the drive system is
automatically switched off. After a short movement in the opposite direction and removal
of the overload source, the drive system will continue to move in the intended direction.
•
When making any adjustments, always ensure that no limbs belonging to patients, users,
other persons, and especially playing children, could become trapped underneath the
rests or the mattress base.
•
When making any adjustments,make sure that devices in the immediate vicinity or attach-
ed to the bed cannot become an entrapment or tipping hazard
Material damage
Failure to heed this warning may result in damage to the hospital bed and/or lifting frame,
and this could have an adverse effect on the loading capacity of the hospital bed or the ad-
justment functions.
Ensure that:
•
No obstacles such as bedside cabinets, supply rails, other equipment, chairs or wall pro-
tection rails are in the way,
•
There are no objects lying on the chassis,
•
People are not sitting on slightly raised sections of the backrest and leg rests.
Risk of fire
Failure to heed this warning may result in physical injury and material damage!
•
Use only flame-retardant mattresses and bedding if possible.
Safety instructions
13 Instruction Manual