9.1.3 Immobilising the bed
9.1.4 Move with steering lock
Similar to images!
2 Set the brake pedal to a horizon-
tal middle position. All castors are
now unlocked. You can now
move the bed.
1 The brake pedal is located at the
foot end of the bed.
2 Press the pedal down on the side
facing the footboard (if colour co-
ded, the red side of the pedal). All
castors are operated with a ped-
al.
One of the castors of the bed can be fitted with a steering lock to make it easier to move the
bed in a straight line and negotiate curves.
Use/routine
Instruction Manual 68
To Next Page
Loading...
