8.7 Laying the patient in the bed
8.8 Restoring factory settings
Image13:
Urine bottle holder, universal accessory holder
When positioning the patient in bed, always ensure that the patient is correctly aligned with
the head end/foot end of the bed.
In this way, you achieve maximum lying comfort and adjust the mattress base elements to an
optimal ergonomic position for the patient.
The following sticker on the outside of the safety sides at the foot end of the bed indicates
the correct position for the patient.
Image14:
Sticker for patient position in bed
A reset to factory settings must only be carried out by technicians and by qualified medical
staff who have been trained by the operator to do so.
A reset to factory settings can be carried out on the LCD handset or control box depending
on the available features.
Bed reprocessing/bed adaptation
61 Instruction Manual
To Next Page
Loading...
