Keep the magnetic key [a] safely out of the reach of children.
•
If the mattress base height is lowered considerably, note that objects inserted in the proc-
ess may become detached from the universal brackets and fall off onto the floor
•
Ensure that the accessories attached do not collide with the brake pedal area. Slide the
universal holders away accordingly.
•
Observe the following weight limits: The universal holders must not hold a weight of more
than 5 kg (acting vertically)!
Tab.1: Universal holders
Opening:
•
Hold the magnetic key provided [a] against cap [b]
•
Remove both parts [a, b]; pull out bolt [c]
Lock:
•
Insert bolt [c] from above
•
and secure it from below by fitting the sealing cap [b]
The sliding universal holders are attached to the lower safety side. A variety of accessories
such as urine bottle holders and universal accessory holders can be attached to the univer-
sal holders.
Bed reprocessing/bed adaptation
Instruction Manual 60
To Next Page
Loading...
