11.2.2 Deleting the maximum mattress base height setting (on the LCD handset)
4 The OK ! shown on the display con-
firms the change to the technician
control level. Let go of the UP and
DOWN buttons.
5 Select the maximum mattress base
height function by pressing the toggle
switch.
6 Press the UP button twice. After
pressing the button for the first time,
the symbol for the maximum mattress
base height appears together with the
“Save” symbol.
7 After pressing the button for the sec-
ond time, the OK ! displayed indicates
the successful pre-setting of the mat-
tress base height restriction. The sym-
bol for the maximum mattress base
height is then displayed again.
1 Repeat steps 2-5, see Setting the min-
imum mattress base height (on the
LCD handset) » 102. The maximum
mattress base height symbol will ap-
pear on the display. Press the DOWN
button. The mattress base height sym-
2 Press the DOWN button. After pressing
the button, the OK ! displayed indicates
the successful deletion of the mattress
base height restriction.
Special bed adaptations
Instruction Manual 100
To Next Page
Loading...
