8.5 Attaching an infusion stand
Only possible if this bed is equipped with the optional adapter sleeve for patient lifting
poles/infusion stands.
1 Attach the grab handle with the strap
to the patient lifting pole.
2 The integrated anti-slip fitting must be
secured properly between the two limit
points of the patient lifting pole.
1 Insert the infusion stand in the adapter sleeves
provided on the left and right side of the bed at the
head end.
When using it, ensure that the pin en-
gages with the recesses provided. In
this way, you effectively prevent the in-
fusion stand from twisting.
Bed reprocessing/bed adaptation
Instruction Manual 58
To Next Page
Loading...
