Stiegelmeyer Seta pro - Setting the Minimum Mattress Base Height (on the Control Box); Deleting the Maximum Mattress Base Height Setting (on the Control Box)

11.2.3 Setting the minimum mattress base height (on the control box)
11.2.4 Deleting the maximum mattress base height setting (on the control box)
The mattress base must be horizontal before a restriction can be defined.
bol will appear and the status mes-
sage X will be displayed for the de-
leted function.
1 Set the mattress base to the desired maximum height. To do
so, simultaneously press the unlock button and the button to
raise the mattress base in order to raise the mattress base.
2 Briefly press the Memory button three times in succession
and immediately afterwards, press the button to raise the
mattress base. As soon as the new position has been saved,
a short signal tone sounds to confirm the change.
1 Briefly press the Memory button three times in succession and
press the lock/unlock button [A] immediately afterwards.
Special bed adaptations
101 Instruction Manual