6.6.3 Materials used
6.6.4 Dimensions
All figures given are approximate values.
The bed is made predominantly of steel sections coated with a polyester powder finish or a
zinc or chromium metal finish.
Depending on the bed model, the mattress base is made of high-quality, PVC-free plastics,
or HPL laminated panels.
The chassis is made of steel sections.
The headboard and footboard panels consist of HPL laminated panels.
All surfaces that can be touched during normal use have been tested for bio-compatibility
and are harmless to humans when in contact with the skin.
Description [cm]
External bed dimensions (WxL) 92.8 x 193
Mattress base (mattress dimensions) 78 x 180
Mattress base division (Backrest - seat - thigh
rest - lower leg rest)
77 – 15 - 28 - 43
Backrest length compensation 10
Ground clearance of chassis (depending on
type of castors)
16.9
Protection height of safety side above mattress
base
37
Min. mattress dimensions * (LxWxH) 78 x 180 x 12
Max. mattress dimensions * (LxWxH) 78 x 180 x 14
* More information about mattress:
- Density: min. 40 kg/m3
- Compression hardness at least 4.0 kPa
- With edge reinforcement: Density 40 kg/m³, Compression hardness: 5.0 kPa
Product description
Instruction Manual 44
To Next Page
Loading...
